Hi! Johnny L. Dose here with another contribution to The Garden Dreamer.
Just a few words on two basic building materials needed for homemade cold frames and greenhouses: polycarbonate panels and wood.
Polycarbonate panels: (www.farmtek.com) sells the panels shown below in 4’ x 8’ sheets and larger. These panels are double walled. The double wall creates a micro greenhouse effect inside the panel, which helps to retain heat. They are also transparent, UV resistant, and will last much longer than polyethylene sheeting. Unfortunately, the cost of shipping is not free. So, you should consider including your friends or your gardening club on the order. These panels are light in weight; therefore, the increased volume of the order does not increase the freight cost by much…I think.
Wood: Since 2 x 4’s are expensive, at the moment, consider businesses that are throwing away pallets and ask if you can have them. HVAC companies, as well as places that sell riding lawn mowers, often have crates that can be re-purposed for a greenhouse or a cold frame. Clearly, you will need to find an easy way of pulling the pallets apart. For this not so easy task, you can try either an isolation tool (multi-tool) or a stepped pickle fork that can be used with an air-hammer. At least, these two options I’m going to test out once my pickle fork kit arrives next week from Amazon.
I’m planning to use a canopy frame (10’ x 20’), EZ-up, or similar to make a greenhouse using the material described above. I will use a combination of cable ties, deck screws, and duct tape to hold it all together. This approach will be easy to take apart, should a building inspector show up, i.e., this greenhouse does not count as a permanent structure to the property. The important thing is to secure whatever you do with a canopy against strong winds. So, tie it down like Lilliputian or it will take off like a big kite. The cat mocks me now as I type. What does he know?
Anyway, feel free to ask me any questions about my experiences with two basic building materials needed for homemade cold frames and greenhouses. I’ll stop now and save some material (pun intended) for my next post as well as gather some data to report back.
All the Best,
Johnny L. Dose
The Garden Dreamer 